Kunshan Ruijun Machinery Co., Ltd.
Kunshan Ruijun Machinery Co., Ltd.
Add to Cart
wire cutting machine
FR400G New Design
Electronica Wire Cut Machine Standard Configuration:
1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
8) LED Inside light (Not outside bulb)
Electronica Wire Cut Machine Feature:
Cooperate Suppliers:
Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)
Electronica Wire Cut Machine Featurers:
1) Parameter is not required to put in, Artificial Intelligence works out perfect parameter
immediately after putting in cutting thickness and wire diameter, Different accuracy based on different workers with different experience will be solved.
2) Roughness: Ra ≤0.8um
3) 3 Time Cutting thickness : ≥200mm
4) Max Machining Speed: 200mm2/min
Electronica Wire Cut Machine Parameters
| Item | unit | FR-700G/M/S | FR850S | FR1100S | |
| Worktable size (L×W) | mm | 720*1040 | 850*1250 | 1100*1500 | |
| Table travel(X×Y) | mm | 450*700 | 600*850 | 800*1100 | |
| Max. work piece thickness | mm | 300 | 500 | 500 | |
| U.V axis | mm | 20*20 | 20*20 | 20*20 | |
| Max. taper angle/plate thickness | degree/mm | ±6°/80mm G model ±12°/80mm M model ±6°/80mm S model | |||
| Motor type | step or servo | G model Step motor M model Step motor S model Servo motor | |||
| Wire diameter | mm | 0.16-0.20 | 0.16-0.20 | 0.16-0.20 | |
| Machine accuracy | Octagon | mm | ±0.005 | ±0.005 | ±0.005 |
| Angle | mm | 0.012 | 0.012 | 0.012 | |
| Roughness, thrice cutting | um | ≤0.8 | ≤0.8 | ≤0.8 | |
| Max. machining speed | mm²/min | 200 | 200 | 200 | |
| Machine dimensions(W×L×H) | mm | 1730*2020*2080 | 2230*2450*2640 | 2730*2900*2640 | |
| Machine weight | Kg | 2300 | 5300 | 6500 | |
| Controller dimensions(W×L×H) | Mm | 600*800*1800 | 600*800*1800 | 600*800*1800 | |
| Wire traveling speed | m/min | 5-11 | 5-11 | 5-11 | |
| Load of table | Kg | 600 | 1500 | 2000 | |
| Rated Power | KVA | 3 | 3 | 3 | |
| Water tank dimension(W×L×H) | mm | 580*960*660 | 750*1200*2640 | 750*1200*2640 | |
| Working reservoir capacity | L | 150 | 200 | 200 | |
Electronica Wire Cut Machine Introduction
Considering the main problems existing in the old type Fast Speed wire cut machine such as low cutting precision, bad surface finishing and slow cutting speed, while the brass wire cut machine is much more expensive and difficult to learn, we develop the second generation Middle Speed Wire Cutting machine based on the technology from Brass wire cut machine, deeply improves the cutting precision, surface finishing (Ra≤0.8um), cutting speed to make the cutting life and technology almost same as brass wire cut machine. But the machine's purchase cost is much lower than brass wire cut machine, the operator who has a little experience of fast speed wire cut machine can use our machine immediately. Comprehensive efficiency is 2 or 3 time as fast speed wire cut machine.
We adopt 6 sets high lever linear guide way on the traveling system including X,Y axis and other running accessories, X,Y axis adopts 2 sets high level ball screw. Wire Swing system: the first company adopt linear guide way, make the travel move smoothly without any obstruction, it make sure the swing without any wear, solve the big obstruction, big wear, etc problem from the V shape guide way.Tape or Angle part: UV axis tape unit has got national patent, patent number:2L2008200332261. Perfect design high lever tape unit, make high accuracy for moving and tape cutting. Wire Tension System: National patent number: 2L200820000226.7. Adopt double direction wire tension system, keep the wire tension with same strength during the working time, which can protect the wire and reduce the wire broken possibility.
